Installation & Care

Most of our fixtures are hardwired and should be installed by a licensed electrician.
Always switch off power at the circuit breaker before installing or servicing a fixture.
Check that your ceiling box is rated to support the weight of the fixture, especially for larger chandeliers.
Follow the instructions included in the box, and check that all parts are present before you begin.
Use bulbs of the type and maximum wattage listed for your fixture.

Glass shades and globes: once cool, wipe with a soft, lint-free cloth. Remove glass and wash it gently with mild soapy water, then dry fully before refitting.
Crystal: wipe each crystal with a soft cloth, or use a spray designed for crystal chandeliers with the power off.
Fabric and woven shades: dust with a soft brush or a vacuum on low with a brush attachment. Avoid water.
Metal finishes: wipe with a dry or slightly damp cloth. Avoid abrasive cleaners, which can damage brass, gold and painted finishes.
Never clean a fixture while it is switched on or still warm.

Questions about installing or caring for your fixture? Contact us.

Stay in the loop